1. Measure VESA holes on the back of your TV or Monitor to match 75x75mm and 100x100mm widths and heights 2. Ensure that your TV or Monitor is not heavier than 60lbs! (most LCD TVs under 32″ are lightweight)
Simple and elegant wall mounting solution for small to medium size TVs. You don’t need to spend a ton of money to mount your TV on a wall. This fixed TV wall mount will install in minutes.
It is made from high-strength steel and will fit most TVs up to 27″ in screen size. To ensure this mount will fit your TV, just verify the bolt holes behind the TV are approximately 3″; or 4″ apart. These correspond to either VESA standard 75 x 75 or VESA standard 100 x 100. If the TV screen size is larger than 27 inches, but the VESA pattern matches the mount, this mount will work with your TV, as long as the TV weighs up to 66 lbs.
This TV wall mount has a very low profile of 5/8 inches, making the installation look flush with the wall.
Fixed TV Wall Mount Bracket supports 13, 14, 15, 17, 20, 22, 25, 27, 30, and 32 screen sizes. Just check the VESA hole distances on the back of the TV (the width and height) to make sure they fit 75×75 mm or 100×100 mm! VESA is supported on nearly every manufacturer (Samsung, Sharp, Sony, Insignia, ViewSonic, etc.)
Adjustable tilt. ~15 degrees of tilt
Low profile 14mm distance from the wall. Your TV will look slender, sleek, and contemporary
Heavy-duty construction provides a hefty 60 lbs weight capacity (30 kg). Modern LED and LCD TVs are lightweight
This Ultra Slim wall mounted bracket is one of the slimmest TV brackets available, designed to fit flat screen LED, LCD and Plasma style TV’s between 14″ to 42″. The bracket is a universal model and designed to fit all of the major manufacturer models.
Ultra Low Profile: measuring only 25mm from the wall, this TV bracket is as subtle as you can get when wall mounting your television flat against the wall
Weight rated to 55lbs – This bracket is one of the strongest brackets available.Constructed from reinforced cold rolled steel.
Make sure install it on a sturdy board or concrete wall.
This TV wall mount has 75mm x 75mm (3″x3″), 100mm x 100mm(4″x4″), 100mm x 200mm(4″x8″), 200mm x 200mm(8″x8″) VESA standard holes for easy use
The Mount-It! MI-430 Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. When you’re reached your destination and are ready to kick back for a movie, simply pull down on the quick release loop, and extend the cantilever arm. This mount can tilt, swivel, extend, and retract to be positioned in almost any viewing angle.
This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23″ to 55″ screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage.
TV SIZE RANGE: 23″ to 55″ LED LCD PLASMA TVs VESA COMPATIBILITY: 75×75,100×100,200×100,200×200,300×300,400×200,400×400 (mm) EXTENSION: 2.3″ to 15.7″ TILT: +10/- degrees SWIVEL: +/- 90 degrees WALL BRACKET DIMENSIONS: 11.8″ H x 7.5″ W
LOCKING RV TV MOUNT is the ideal RV, motorhome and camper TV accessory. High-strength steel full-motion RV TV mount locks the swivel arm to prevent it from moving while in-transit and to prevent vibration damage to your flat screen TV. Easily lock and release your TV simply by pulling the strap. Works with your VESA-compatible television from 23″ to 55″ TVs.
CANTILEVER LOCKABLE ARM: A secure wall bracket with an articulating arm that locks into a folded position and releases with an anti-vibration spring lock. We offer extension brackets that competition does not have. Our mount fits larger TVs with VESA 400×400 bolt hole patterns.
QUICK DISCONNECT DETACHABLE VESA BRACKET: The VESA plate is removable to conveniently remove a TV from the wall bracket for extended storage, or to quickly reinstall it.
FULL MOTION TIL AND SWIVEL: Tilt +10/-15 degrees, Swivel +/- 90 degrees, Extension 2.3″ – 15.7″, VESA compatible with 75x75mm, 100×100, 200×100, 200×200, 300×300, 400×200 and 400x400mm.
HEAVY DUTY CONSTRUCTION: The all-steel frame has stopping pins to reduce vibration, supports up to 77 lbs, and the kit includes a universal hardware kit.