Aeromount Tilt LCD-271 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 26inch – 55inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1.Size, Weight and Load-Bearing:
LCD-271 TV bracket size is about 13.6in x 7.9in x 7.9in,
net weight is about 2 pounds,
display weight should be less than 30 pounds.

2.Installation Hole Spacing:
Suitable for 3″ x 3″ / 4″ x 4″ / 4″ x 8″ / 8″ x 4″ / 8″ x 8″ according
to VESA standard. (check VESA and weight before installation)

3.Fit for 26 – 55 inch TV:
Check the back of the TV for four mounting holes(VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4.Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5.Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 26inch – 55inch televisions with a maximum load-bearing capacity of 13.6KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-271 wall mount can be rotated by 180° between the rod and panel, 270° between the rod and bar, and 15° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 13.6 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Check out our website for details…

Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Detailed information available on our homepage…

Mount-It! TV Mount with Shelf | Full Motion TV Wall Mount with Floating Entertainment Shelf | Single Stud Installation | Fits Televisions Up to 55 Inches, VESA 75x75mm to 400x400mm

Upgrade your entertainment space with this sleek TV mount and shelf combo from Mount-It! This duo is the perfect complement to your living room or entertainment space. 

 

The full motion TV wall mount tilts, swivels, extends and retracts, allowing you to find the perfect view from anywhere in the room. Mounting the floating tempered glass shelf directly under your TV allows for an easier connection for your gaming console, DVD player or any other media device, all while keeping a clean, organized look.

 

The shelf holds up to 22 lbs, while the television mount holds up to 66 lbs and fits VESA patterns between 75x75mm and 400x400mm. The TV mount holds flat screens up to 55 inches. Both require only a single stud for installation, making the mounting process as easy as it gets.

Product Specifications:

TV Mount

  • VESA 75x75mm, 100x100mm, 200x200mm, 200x100mm, 200x400mm, 300x300mm, 400x200mm, 400x400mm
  • Fits TVs up to 55″
  • 66 Lb weight capacity
  • +/-20 Degree Tilt
  • +/-90 Degree Swivel
  • Retracts down to 3.5″
  • Extends up to 15″
  • Single stud installation

Floating Shelf

  • Tempered glass for safety
  • 22 Lb Weight Capacity
  • 10″x14″
  • Single stud installation

 

 

Product Features

  • TV MOUNT and SHELF COMBO: Upgrade your entertainment center with this TV wall mount with shelf for a clean, sleek and minimalist look. Fits TVs up to 55 inches, with VESA patterns from 75x75mm to 400x400mm.
  • FULL MOTION TV WALL MOUNT: Adjust your TV with this articulating mount to find the perfect view from anywhere in the room. 20 degree up and down tilt, 180 degree swivel left to right and retracts down to 3.5″ and extends up to 15.7″ from the wall.
  • TEMPERED GLASS SHELF: Conveniently mount this shelf to the wall under your TV for an easier connection to your media devices. Platform measures 10″x14″, holds up to 22lbs and is made of tempered glass for added safety.
  • ALL IN ONE MOUNTING COMBO: Great for your gaming consoles, DVD player, cable box and more! Package includes an HDMI cable, cable ties, screen cleaner and a microfiber cloth.
  • EASY INSTALLATION: Install your TV bracket wall mount with shelf using the included hardware. Both television mount and shelf require only a single stud for installation.

Detailed information available on our homepage…