Aeromount Tilt LCD-271 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 26inch – 55inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1.Size, Weight and Load-Bearing:
LCD-271 TV bracket size is about 13.6in x 7.9in x 7.9in,
net weight is about 2 pounds,
display weight should be less than 30 pounds.

2.Installation Hole Spacing:
Suitable for 3″ x 3″ / 4″ x 4″ / 4″ x 8″ / 8″ x 4″ / 8″ x 8″ according
to VESA standard. (check VESA and weight before installation)

3.Fit for 26 – 55 inch TV:
Check the back of the TV for four mounting holes(VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4.Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5.Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 26inch – 55inch televisions with a maximum load-bearing capacity of 13.6KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-271 wall mount can be rotated by 180° between the rod and panel, 270° between the rod and bar, and 15° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 13.6 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Check out our website for details…

Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Detailed information available on our homepage…

Mount-It! Extra Long Ceiling TV Mount Bracket, 10 Feet Long, Fits 40 42 47 50 55 60 70 Inch Flat Panel Televisions, Adjustable Height Telescoping Tilt and Swivel, Vaulted Ceilings Up to VESA 600×400

Ideal for commercial installations with high ceilings. This ceiling TV mount extends 10 ft from ceiling. The full motion capabilities of this mount give your screen a large range of mobility for an adaptable and comfortable environment.

Rotate the screen 360 degrees to face any direction in the room. The multi-directional design is also paired with a tilting motion for a 25 degree range. Tilt or pivot your screen for a wide array of potential ergonomic settings. With this product, at any height you can ensure your display will be projecting its image directly to you for optimal image quality.

The fully capable design is coupled with a high quality reinforced steel. The alloy can maintain and support up to 110 lbs and screens as large as 70 inches. The VESA bracket is nearly universal covering 200×200, 300×300 400×200, 400×400, 600×400 mm configurations. Simply slide the VESA arms along the plate to adjust. The universal compatibility ensures that this enduring design will last throughout multiple screen upgrades or replacements so you will not ever have to buy another mount. All necessary hardware and instructions are included.

Features and Specifications:

Screen Sizes 32 to 70 (inches)
VESA 200×200 to 600×400 (mm)
Max Load Capacity 110 lbs
Rotate 360 degrees
Tilt 25 degree down
Height adjustability 98.4 to 118.1 inches
Cable Management Ready
Color Black

Product Features

  • LONG CEILING TV MOUNT: Premium ceiling bracket for flat or vaulted (slanted) ceilings. Save space and increase functionality of your television. Use in bars, theaters, businesses, schools, hospitals, lobbies, hotels, manufacturing plants, production lines
  • UNIVERSAL VESA BRACKET: Fits most TV brands with screen size of 32, 35, 37, 38, 40, 42, 45, 48, 50, 55, 60, 65, 70 and some 75. Compatible with standard VESA patterns of 200×200, 300×300, 400×200, 400×300, 400X400, 600×200, 600×300, 600×400
  • LONG REACH AND FULL MOTION DESIGN: Extends up to 9.85 feet from ceiling (ceiling to middle of TV mount). Height adjustable (98 to 118 inches), tilt down up to 25 degrees, 360 degree full rotation/swivel. Up to 60 degrees of swivel at the base for angled/sloped ceilings. Up to 3 degrees post installation leveling.
  • HEAVY DUTY: 100 Lbs Capacity. Commercial grade hanging TV mount with high-strength steel. Tested to 3 times the rated capacity of 110 Lbs.
  • EASY INSTALLATION: Simple connection to all types of ceilings. Cable management holes in the bracket plate ensure you have easy access to cords and ports.

Check out our website for details…