DESCRIPTION Sony’s PlayStation 4 Slim comes with a sleek, single tone matte finish. Our mounts give your PS4 Slim & controllers an amazing free floating look. Our HIDEit 4S design uses both the center channel of the PS4 Slim and Sony’s own secure mounting mechanism built into the PS4 Pro; a small screw secures the mount to the device so there is no way for the PlayStation to fall or slide out. You can choose to VESA or wall mount your PS4 and have it mounted in minutes. As with all our Gaming Mounts, our design does not obstruct ventilation. For durability we use powder-coated 16-gauge steel for this bundle. These mounts are built to last. Happy Gaming!
PS4 Slim & Controllers Sold Separately
FEATURES Openings allow full access to power port, digital out port, and all vents. VESA Compatible: 100mm (M4) & 200mm (M6) *** Position for disk access on right or left side. Made in the USA from Recycled & Imported Steel. Powder coat finish prevents rust & won’t chip. Uni-C hook shaped design works with nearly any controller. Includes M4 and M6 VESA screws, Sony Securing Mechanism screw, drywall screws and anchors. Stud mounting is optional.
*** Please VESA Mount with Caution. HIDEit Mounts is not responsible for TV stand weight distribution hazards associated with VESA mounting.
WALL MOUNT FOR CONVENIENT ACCESS. Wall mount your PlayStation 4 Slim and HIDEit behind the TV for an ultra-clean gaming setup or DISPLAYit to show off your limited edition PS4 Slim in style. Controller mounts make it easy to show off your favorite PlayStation controllers!
CUSTOM MOUNT DESIGN. Our HIDEit PS4 Slim Mount secures the PS4 Slim using Sony’s Secure Mounting Mechanism built directly into the console! Thanks to the sleek and simple design of our mount, it’s easy to slide the PS4 Slim console in and out of the wall mount.
KEEP YOUR PS4 COOL. The HIDEit 4S doesn’t block vent openings, ensuring maximum airflow. Unlike most media cabinets and TV stands, the HIDEit 4S PS4 Slim Wall Mount won’t trap heat, keeping your Slim PS4 console cool.
STEEL FOR ULTIMATE STRENGTH. Like your TV wall mount, the HIDEit PS4 Slim Mount is made in the USA from 16 gauge, cold-rolled steel for strength you can trust. Powder-coat finish won’t rust or chip and protects your PlayStation and controllers from scratches.
INSTALLit IN JUST 3 EASY STEPS. No complicated templates. Drill not required. Stud mounting optional. Includes flat head drywall screws, drywall anchors rated for 25 pounds each, M3 screw, M4 and M6 VESA screws.
PRODUCT DESCRIPTION With an impressively ultra low mounting profile of just 0.39-Inch from the wall, the QualGear QG-TM-002-BLK model is a super slim mount perfectly suited to complement your contemporary style and envy your friends and neighbors by showing off your flat TV installation. This mount supports most 37-Inch to 70-Inch flat panel TVs up to 66 lbs. This mount is part of the Ultra Low Profile Series of fixed mounts offering a sleek and slim design combined with easy installation.
TV COMPATIBILITY CHECK To check to see this mount works for your TV or monitor, please ensure your TV meets all of the checks specified below: 1. Size of TV: Supports most 37 to 70-inch TVs. 2. Weight of TV: Supports TVs that are weighing up to 66 lbs. 3. Mounting Hole Patterns (VESA) in mm: Supports standard mounting hole patterns from 200×200 to 800×400. 4. Studs: Supports both 16-inch and 24-inch most standard wooden stud spacings in the United States. For walls that use wooden studs at 16-inch spacing, it is strongly recommended to mount this mount to 3 studs.
PRODUCT FEATURES 1. Super slim design places TV just 0.39 inches from the wall to enhance the look of ultra-thin LED TVs 2. Spring-lock design enables easy display attachment and detachment 3. Direction indicators are marked clearly on the mount 4. TV can be glided a few inches to left or right for perfect centering based on surroundings 5. Pre-sorted hardware pack for easy installation 6. Mounting hardware is included for mounting to wooden studs, concrete and brick surfaces
Mount Type: Fixed
Supported TV Sizes: 37″ – 70″
Maximum Weight Capacity: 88 lbs
Supported Mounting Hole Patterns (VESA): 200x200mm to 800x400mm