Aeromount Tilt LCD-271 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 26inch – 55inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1.Size, Weight and Load-Bearing:
LCD-271 TV bracket size is about 13.6in x 7.9in x 7.9in,
net weight is about 2 pounds,
display weight should be less than 30 pounds.

2.Installation Hole Spacing:
Suitable for 3″ x 3″ / 4″ x 4″ / 4″ x 8″ / 8″ x 4″ / 8″ x 8″ according
to VESA standard. (check VESA and weight before installation)

3.Fit for 26 – 55 inch TV:
Check the back of the TV for four mounting holes(VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4.Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5.Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 26inch – 55inch televisions with a maximum load-bearing capacity of 13.6KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-271 wall mount can be rotated by 180° between the rod and panel, 270° between the rod and bar, and 15° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 13.6 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Check out our website for details…

Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Detailed information available on our homepage…

Monoprice Above Fireplace Pull-Down Full-Motion Articulating TV Wall Mount Bracket – for TVs 32in to 50in, Max Weight 60lbs, VESA Patterns Up to 400×400, Rotating, Height Adjustable

Mount your television conveniently above your fireplace using this Above Fireplace Mount. It is capable of supporting televisions with screen sizes from 32″ ~ 50″, with VESA patterns from 100×100 to 400×400, and weighing between 13.2 ~ 66.1 lbs. (6 ~ 30 kg). The mount allows you to keep the TV safely up and out of the way when not in use, then you can pull it down to eye level for comfortable viewing.

Elegant TV Mounting: Above the fireplace is often the perfect place to mount a TV, but it’s a pain in the neck to watch it there. By letting you pull the TV down to a comfortable height, you can eliminate neck and back strain when watching TV.

Comfortable Viewing: When you want to watch TV, the spring-assisted mount lets you effortlessly pull the TV forward and down to a comfortable viewing position, where you can sit on the sofa without craning your neck upward. When you’re not watching, the mount returns the TV to its position above the fireplace.

ETL Certified: On average, Monoprice sells a new wall mount every minute of every day! Certified by ETL testing labs to satisfy UL standards, this wall mount has been strength tested to ensure it is safe for both your equipment and your family.

Up to 66 lbs.: This mount supports TVs from 32″ ~ 50″ and weighing up to 66 lbs.

Product Features

  • Buy with Confidence: With Monoprice’s Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
  • Comfortable Viewing:When you want to watch TV, the spring-assisted mount lets you effortlessly pull the TV forward and down to a comfortable viewing position, where you can sit on the sofa without craning your neck upward. When you’re not watching, the mount returns the TV to its position above the fireplace.
  • ETL Certified:On average, Monoprice sells a new wall mount every minute of every day! Certified by ETL testing labs to satisfy UL standards, this wall mount has been strength tested to ensure it is safe for both your equipment and your family.
  • Up to 66 lbs.:This mount supports TVs from 32″ ~ 50″ and weighing up to 66 lbs.
  • Smooth Full-Range Motion: Effortlessly raise, lower, pull, push, and adjust the mount to the perfect position for comfortable viewing.

Click here if you need more detailed info…