Looking for a heavy duty, TV riser with swivel and tilt capabilities? Then the MI-853 is your answer. Mount swivels 35 degrees left and right, and tilts 3 degrees up and 10 degrees down to reduce glare.
Tilts 3 degrees up and 10 degrees down
Swivels 35 degrees left and 35 degrees right
Supports up to a whopping 77 pounds!
Black powder coat finish is highly scratch resistant
It also includes all of the necessary hardware required for quick assembly and comes with an instructional manual
Comes with a 5-YEAR WARRANTY
Friendly, US-based customer service department is available to answer any questions you may have during normal business hours
Universal table top TV stand is compatible with all television brands (Insignia, LG, Samsung, Sharp, Sony, Toshiba, Vizio, TCL, etc.) from 37 inches up to 70 inches.
Mounts using a standard VESA pattern of bolt holes located on the back of the TV. Fits patterns of 200x200mm up to 600x400mm. Measure distance between the bolt holes, in millimeters, if unsure of size.
Bracket swivels 35 degrees left and 35 degrees right, and the mount tilts 3 degrees up and 10 degrees down to avoid glare.
TV riser mount is made of steel, with a sleek, “piano-finish” black wooden base that is sturdy and able to support up to 77 pounds.
Comes with 5-year warranty and our friendly US-based customer support team is available to answer any questions you may have during normal business hours.
Extra Long Arm TV Mount: Designed to fit most 42″-80″ LCD/LED/Plasma TVs on the market. Fits VESA patterns 200×200 up to 800x400mm, and up to 110lbs (Fits 200×200, 300×200, 300×300, 400×200, 400×300, 400×400, 600×200, 600×400, 800×400). Please check the VESA (mounting hole pattern behind TV), stud spacing, possible blocked cable/input and your TV weight prior to making purchase decision to determine whether this TV wall mount will fit your TV.
Have you wanted to watch TV from an adjacent room but your current mount prohibits you from doing so? Our Extra Long Arm Tv mount solves your visibility issues with a 40 inch Full Motion Articulating arm. Giving you maxim versatility and easy maneuverability. Arm extends 39.8″ from the wall maximizing your vantage points from a variety of angles in multiple rooms.
40 inch Extended Articulating TV Mount: fully equipped with Tilting, Swiveling, Articulating, Extending, and Collapsing cababilities. Making it ideal for corner installation, over a fireplace, or inside a TV center. Mount also offers a solution to aesthetically unappealing loose hanging wires with its cable management system.
This Extra Long Arm TV Mount is equipped with three pivot points, allowing up to 180 degree swivel. Continuous Tilt Feature (up to 15 degrees upwards or 5 degrees downwards) for Better Viewing Angle and Reduced Glare. Low-profile design ensures TV is close to the wall for a sleek finish.
Heavy Duty Extra Long TV bracket is weight rated to 110 lbs, one of the strongest brackets available on Amazon. Install your precious TV with confidence. Constructed from Reinforced Steel. Quick and easy to install – extra long tv bracket comes complete with full instructions.
Mount-It! TV Wall Mount Bracket with Full Motion Arm Fits 13-42″ Flat Screen TVs VESA 75, 100, 200, 55lb Weight Capacity WITH 15″ EXTENSION
MI-407-1 TV wall mount fits the majority of displays in the 19-42″ size range.
Removable VESA bracket allows easy installation, as well as ability to take the TV out of the mount without removing the mount from the wall – ideal for outdoor installations.
It fits VESA 75×75, 100×100, 200×100, 200×200. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 3 and 8 inches per side.
Weight limit is 55 lbs.
This mount provides 15″ of extension and collapses to 2″ from the wall.
This is a full motion mount with 360 degrees of rotation, +/- 15 degrees of tilt and 180 degrees of swivel.
The load bearing portions of the mount are constructed from High Grade Steel providing a sturdy and reliable mount and separate cover pieces for the wall plate and pivot joints providing a clean finished look.
The package includes the mount, manual, all necessary installation hardware. SPECIFICATIONS Screen Sizes: 19″ up to 42″ (inches) Extension: 15″ Tilt: (+/-) 15 degrees Swivel: 180 degrees (from base) Rotate: 360 degrees VESA Compatibility: 75×75, 100×100, 200×200 (mm) Weight: 55 lbs Material: Steel Manual: Yes Hardware Included: Yes
ARTICULATING TV WALL MOUNT – Articulating arms offer full motion capability. Swivel 180 degrees, Rotation 360 degrees, Tilt 15 degrees up and down
VESA COMPATIBLE – Fits 75×75, 100×100, 200×100, 200×200 Up to 55 lbs. Ideal for small to mid-sized TVs
UNIVERSAL TV BRACKET – Compatible with all the TVs in the market with VESA patterns of 75 (3″ x 3″) to 200 (8″ x 8″) bolt hole patterns. This pattern is typically suitable for 27, 29, 30, 32, 37, 40, 42 and even some 47, 50 and 55 Inch TVs.
EXTENSION WITH LONG ARM – Extends up to 15 inches away from the wall. Ideal for corner installations or as a monitor wall mount.
EASY INSTALLATION – Removable Plate allows the mount and TV to be installed separately – perfect for outdoors. Hardware and Instruction Manual Included.