Echogear in Wall Power Kit Includes Low Voltage Cable Management – Hide TV Wires When Mounting A TV – Includes Hole Saw Drill Attachment for Easy Install

Visible Cables Look Bad Do you hang your toilet paper under? Of course not! Because you’re not a psychopath. That’s why we know you wouldn’t let ugly, messy cables dangle under your TV either. Why go to the trouble of mounting your TV if you’re just going eff it up with poor cable management? That’s why we designed this easy-to-install, DIY in-wall power cord and cable routing kit – for the good people of the world that would never settle for cable chaos. Pro Tip? Go No Pro You can do this! We have the utmost faith in you and your skills. Ok, we don’t actually know anything about your skills, so we made sure this kit was easy to install for ALL cable management enthusiasts. (That sounds nerdy. But also hot, right? Nerdy hot. Sploosh.) Just when you thought it couldn’t get better… did we mention it takes less than 30 minutes to install? #micdrop (Don’t believe us? Check out the install manual – it’s included on this listing.) It’s a Kit in a Box You can have whatever you like! (But you’ve already got everything you need.) As long as you’ve got a drill handy, you can skip that trip to Home Depot. Complete with hole saw drill attachment, two pre-wired grommets and 6′ extension cord, this kit is all-inclusive and ready to install. We’re Here to Help Questions? Installation concerns? Testing knock-knock jokes? We’re here for it. Literally. We’ve got real-life, know-it-all product experts standing by, ready to help seven days a week. The Nerdy Stuff Cable Pass-Through Width: 1.75″ Max Distance Between Top & Bottom Module: 5′ Minimum Drywall Thickness: 1/2″ Maximum Drywall Thickness: 1″ Minimum Space Into Drywall: 3″ Saws Included: Drill hole saw attachment Cords Included: 6′ extension cable ETL Certified? Hell yeah Model: EGAV-CMIWP1

Product Features

  • Route your power and AV cables behind the wall in 30 minutes or less with this DIY kit. All you need to bring is a drill…and maybe a beer.
  • Pre-wired, power-ready system is ETL In-Wall Certified and will keep your house up to code. It’ll have you singing “I’ve Got The Power” like someone threw Jock Jams on.
  • Cable pass-through has plenty of space for all your HDMI, Ethernet, and audio cables. It can comfortably fit 4 large braided HDMI cables, but it’s flexible enough to handle additional cables.
  • Includes a drywall hole saw drill attachment for perfect grommet fit. Locking bracket wings hold onto your wall from behind for a secure install, even if you host raves every weekend.
  • Place the power modules up to 5′ apart on your wall. If you run into any issues, we’re always here to help. Call or chat with an Echogear product know-it-all any day of the week.

Detailed information available on our homepage…

Echogear No Stud TV Wall Mount – Low Profile Design Works with TVs Up to 100lbs – Mount TV On Drywall Without Drill Damage – Fast 15 Minute Install – Steel Frame Securely Anchors TV to The Wall

Nailed It

Literally. Sure, we think they’re funny too, but you didn’t come here for Pinterest failures. You came here for a no drill, no stud, no bull TV mounting solution that’ll hold your precious TV (cue Gollum voice) tight to the wall. Maybe handy is not your thing. Maybe you don’t have a drill. Maybe you just want to up your hammerschlagen skills, and we feel that. Whatever it is that brought you here, you’ve come to the right spot. This bad boy (and its 32-strong nail helper #squad) holds TVs up to 100 lbs. Now seems like a good time to mention that this thing is UL certified, which means it was tested to hold 4x the stated weight (100lbs). So yeah, it safely held 400lbs. That’s like, a lot.

Furiously Fast

What happens when you’re working with a mount that needs no studs? The answer is magic. Magic happens – in the form of a stupid-fast installation. Got a screwdriver? Know your way around a hammer? If yes to these two things: You can have your TV up and on the wall in less than 15 minutes. (Like. A lot less. Don’t believe us? Check out the installation video!)

Keep it Simple

You came looking for a simple solution and gosh dang it, a simple solution you have found! We’d actually say that shows some serious smarts. Also smart? The design of this drywall-compatible mount. Our US-based product experts engineered it to be incredibly easy to install. We’ve already covered the no stud, no drill story, but did we also mention the fact that there’s a built-in bubble level? One less tool to bring to the party – you’re welcome. Oh, and locking your TV into place? Done with the the push of a button.

Just in case we’re overselling the “easy-factor” (and we’re not, but our lawyers told us we should include this next bit): We’ve got a whole team of Echogear product know-it-alls standing by seven-days-a-week, ready to answer your questions and/or assist if something doesn’t seem quite right.

Model: EGLD1

Product Features

  • No drilling. No, really: This mount installs directly to drywall – no studs necessary. 32 tiny-but-mighty nails work as a team to hold up to 100 pounds safely for TVs up to 77″.
  • With your TV sitting only 1.18″ from the wall, this mount’s super slim, low profile design makes it all but invisible. Plus, the bottom of the screen rests against the wall for glare-killing tilt.
  • Don’t need the screen tilt? We included magnetic standoffs to prop up the TV for a flush finish. Bonus: It’ll also give you additional room to access cables & prevent wall scratches.
  • Get it straight: Built-in bubble level means you’ll get your installation jussssst right the first time. After you’re done, lock it in place with the oddly satisfying safety button.
  • Thanks to its universal design, this mount fits so many TVs, we might as well call it “Mr. Worldwide.” Turns out, that nickname’s taken, so we’ll call it “Mr. Mount Compatible with VESA patterns 75mm – 625mm” instead.

Detailed information available on our homepage…

Echogear in-Wall Cable Management Kit – Cable Hider Conceals Low Voltage Cords – Includes 2 Pass Through Grommets, Locking Brackets, and Hole Saw Drill Attachment

Visible Cables Look Bad Don’t hate – it’s the truth, and you know it. But don’t panic. In true ECHOGEAR fashion, we offer you an easy-to-install, DIY, cable management solution because we’re friends. And friends don’t let friends settle for messy, dangling cables. (Ew!) Friend, meet our In-Wall Cable Routing kit, designed to hide those ugly cords inside the wall and completely out of sight.  Professional Solution Without the Professional Cost We know what you’re thinking: “Inside the wall? I can’t do that!” Do you have a drill? Yes? Well then, we’re here to assure you that you can. And not only that, but you can do it all by yourself in 20 minutes or less. #adulting All-Inclusive Kit This one-stop-shop kit includes everything you need to get those cables out of the way. In the box you’ll find a hole saw drill attachment and two low-voltage grommets (one for behind the TV and one for behind your components).  We’re Here to Help Questions? Installation concerns? Testing knock-knock jokes? We’re here for it. Literally. We’ve got real-life, know-it-all product experts standing by, ready to help seven days a week. Just call us at 1-855-428-2490 or visit ECHOGEAR.com to chat with someone from our team. Model: EGAV-CMIWG1

Product Features

  • Hide your cables behind the wall with this DIY cable pass-through kit. Just add a drill and you’ve got everything you need for a quick 20-minute install. You’ll only need to skip 1 episode of The Office.
  • Perfect for hiding HDMI, Aux, and other low-voltage cables. Also works for in-wall rated power cables. Just make sure your dog hasn’t been chewing on them first.
  • Includes a drywall hole saw drill attachment for a perfect grommet fit. The grommets even lock onto the back of your drywall for a secure install. Saw attachment also useful in the event of a zombie apocalypse.
  • Flexible pass through grommets can comfortably fit 4 large HDMI cables. There’s plenty of room for even your thickest cords.
  • Feeling artsy? These grommets are paintable for maximum concealment. Bob Ross would be proud.

Visit the website for more information…