Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Detailed information available on our homepage…

Kanto PDX650G Outdoor Full Motion Mount for 37-inch to 75-inch TVs – Black

Designed for patios, decks and balconies, the PDX650G full motion wall mount provides a weather-proof solution to mounting your TV outdoors. Along with stainless steel hardware, its galvanized steel frame and powder-coated finish help to prevent rust and protect against wear and tear. Built for TVs measuring up to 75 inches, this outdoor mount sits 2 inches from the wall and offers 22 inches of extension, allowing you to pan, swivel and tilt your TV into the optimal viewing position. Wall plate covers are included to ensure a clean installation, while integrated cable management keeps your cables safe and out-of-sight.

Product Features

  • OUTDOOR USE – Galvanized steel frame and stainless steel hardware protect against rust.
  • LOW PROFILE – Push your TV to sit 2″ from the wall, keeping it safely out of the way in high-traffic areas.
  • MAXIMUM EXTENSION – Extends 21.8″ from the wall to improve visibility of your TV.
  • TILT & SWIVEL – Swivels 160° and tilts +15°/-3° to ensure you always have the best viewing angle.
  • SLEEK CABLE MANAGEMENT – Keep your viewing area tidy by routing your cables through the provided cable management clips.

Detailed information available on our homepage…

Swift Mount SWIFT650-AP Multi Position TV Wall Mount for 37-inch to 80-inch TVs

The SWIFT650-AP is a multi-position TV wall mount for flat panel TVs up 101 lbs (37″-80”). Profile is only 3.62″ from the wall when retracted and 21.3″ when extended. It is VESA compatible with hole patterns 100×100, to 600x400mm. The SWIFT650-AP multi-position TV mount not only saves valuable shelf space or floor space, but it also safely secures your TV to the wall preventing it from accidentally tipping over. Its easy to assemble design allows for quick installation. It tilts, swivels, extends, and pans, which allows adjustment for optimal viewing angles, or viewing from multiple rooms. This feature also makes it an ideal mount to position a TV into a corner of a room.

Product Features

  • Pan, Swivel, Tilt TV Wall Mount with 3.62″ Mounting Profile & 21.3″ Extension
  • Supports TVs up to 101 lbs
  • 100×100 to 600x400mm VESA Mounting Patterns
  • Quick, Easy, and Secure Installation with Included Hardware
  • Basic Packaging to Minimize Waste

Click Here For More Information