Aeromount Tilt LCD-271 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 26inch – 55inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1.Size, Weight and Load-Bearing:
LCD-271 TV bracket size is about 13.6in x 7.9in x 7.9in,
net weight is about 2 pounds,
display weight should be less than 30 pounds.

2.Installation Hole Spacing:
Suitable for 3″ x 3″ / 4″ x 4″ / 4″ x 8″ / 8″ x 4″ / 8″ x 8″ according
to VESA standard. (check VESA and weight before installation)

3.Fit for 26 – 55 inch TV:
Check the back of the TV for four mounting holes(VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4.Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5.Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 26inch – 55inch televisions with a maximum load-bearing capacity of 13.6KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-271 wall mount can be rotated by 180° between the rod and panel, 270° between the rod and bar, and 15° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 13.6 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Check out our website for details…

Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Detailed information available on our homepage…

TV Wall Bracket,Lumsing Tilt TV Wall Mount Bracket for 13-32″ LCD LED Plasma Flat Panel Screen TV Monitors MAX VESA 200mm x 200mm Load Capacity 77lbs

Specification:

1. Distance to the wall: 49 mm (1.93inch)
2. Supportable Display Size: fits 99+% of TVs for 13″-32″(check VESA and Weight). ”
3. Load Capacity: 77lbs (35KG).
4. Material: 2.0mm SPCC (Cold Plate Steel).
5. Tilt: 20 degree of Down/Forward .
6. Supports VESA standards up to 200mm x 200mm (7.9″ x 7.9″)
7. VESA(mounting hole pattern) 75x75mm,100x100mm,200x200mm
8. Quick release design:the detachable VESA plate can be taken off for quick and easy installation.
9.All installation hardware included.

Package Contents:
1 x TV Wall Mount
1 x Standard Mounting Hardware Set
1 x User Manual

Product Features

  • Universally fits 99+% of TVs for 13″-32″ LED, LCD, Plasma TVs and flat panel displays such as Dynex/Dell/Olevia syntax/ polaroid/Sony/ Samsung/ LG/ Haier/ Panasonic/ Vizio/ Sharp AQUOS/Insignia/Westinghouse/Pioneer/ProScan/RCA/Toshiba/Magnavox/Sanyo/Philips/Emerson/Coby/JVC/AOC and more.
  • Distance to the wall:49 mm (1.93inch);Load Capacity: 77 lbs (35KG)
  • MAX VESA 200x200mm;Fit VESA(mounting hole pattern)75x75mm,100x100mm,200x200mm
  • Tilt: 20°of Down/Forward tilt
  • Please check VESA (mounting hole pattern), stud spacing,TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application.

Visit the website for more information…