Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

Attention:
1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Detailed information available on our homepage…

Mount-It! TV Wall Mount Bracket with Full Motion Articulating Arm 17-Inch Extension for 26 – 55 Inch LED, LCD, OLED Plasma TVs, 180 Deg Swivel 15 Deg Tilt

MI-3991B universal TV wall mount is compatible with most TVs currently on the market. Its adjustable bolt hole pattern fits VESA patterns from 100x100mm to 400x400mm, making it ideal for small to mid-size TVs.

Full motion arms offer swivel, tilt and rotation adjustments. Tilt down 15 degrees and up 10 degrees prevents glare. Swivel left or right of 90 degrees allows perfect TV angle adjustment for easy viewing from any seat in the room. Post-installation leveling adjustment of 3 degrees ensures the TV is perfectly level.

The arms can fold towards the wall for 2.5 inch minimum extension to a maximum of 17 inches. Extension feature is great for corner installation.

Installation is very simple thanks to single stud installation and the integrated bubble level. Simply mount the wall plate to the wall, then connect the TV brackets to the back of your TV and finally connect the brackets to the wall mount arm.

Cable management neatly organizes the cables from behind the wall to the back of your TV for a clean, professional looking installation.

Cold-rolled steel and sturdy design results in 77 lbs weight capacity. Making this wall mount strong enough for even the larger plasma TVs.

Product Features

  • UNIVERSAL TV MOUNT – Fits virtually all TV brands and models with its adjustable bolt hole pattern. It fits VESA 75X75mm, 100X100mm, 200X100mm, 200X150mm, 200X200mm, 300X200mm, 300X300mm, 400X200mm, 400X300mm, 400X400mm
  • FULL MOTION TV BRACKET – Articulating arms swivel 90 deg left and right, tilt down 15 deg, up 10 deg. 3 deg rotating allows post-installation level adjustment.
  • EXTENDING WALL MOUNT – Swivel arm retracts 2.5 inch (to wall) to save space, and extends up to 17 inch from the wall. Smooth joints make position adjustments a breeze.
  • EASY-INSTALLATION – Install to a single wall stud in a few minutes. See our video for installation instructions.
  • CABLE MANAGEMENT – Cable management on arms keeps cables tidy. This mount also fits curved TVs. Hardware bubble level included.

Click Here For More Information

Mount-It! MI-3991L Wall Mount Bracket with Full Motion Articulating Arm 17-Inch Extension for 37-70 Inches LED, LCD OLED TVs, VESA 600×400

MI-3991L economy full-motion mount accommodates most 37″-70″ flat panel TVs up to 35kg/77lbs. This mount extends out 17 inches from wall and allows full-motion capabilities. Full motion allows maximum flexibility – tilts and swivel your TV for easy viewing from any seat in a room. Its post-installation leveling adjustment ensures the TV is perfectly positioned on the wall. Integrated cable management system keeps cables organized and protected.

Product Features

  • +10°/-15° Tilt, +/-90°Swivel (Maximum swivel angle depends on TV size) and +/-3° rotate for maximum viewing flexibility, Post-installation level adjustment allows the TV to perfectly level
  • Articulating arm retracts 2.5-Inch (to wall) to save space, and extends up to 17-Inch from the wall
  • Cable management on arms keeps cables tidy. This mount also fits curved TVs
  • Robot welding technology results in rigid structure and perfect welds at every seam, ensures mounted TV is stable and secure.
  • Fits for most of 37-70 Inch TVs, It fits TVs with mounting holes as close as 4X4-Inch or as wide as 24 x 16-Inches (in TV terms – VESA 100x100mm to 600x400mm), Specifically, it fits VESA 100X100mm, 200X100mm, 200X150mm, 200X200mm, 300X200mm, 300X300mm, 400X200mm, 400X300mm, 400X400mm, 600x400mm

Check out our website for details…