Loctek R2 For Both Flat Panel And Curved Panel UHD HD TV Wall Mount Bracket Articulating Arm Swivel & Tilt for most of 32-70 Inches LED, LCD, Plasma, OLED TVs

1. Perfect fit for Curved TVs. Overall Dimension: 27.95″*16.93″*(3.3″ – 18.8″) [712mm*430mm*(84-478)mm]
2. Universal Hole Pattern: Universal fit for 32″-70″ televisions with back hole pattern up to 600x400mm
3. Full motion allows maximum flexibility: Extend, tilt and swivel your TV between 3.3″ and 18.8″ from the wall, which helps to clean and collect the cables.
4. Extended articulating system: wide-angle swivel between -90°to +90° meet different viewing needs. One TV set is endowed with the multiple functions.
5. Tilt your TV for perfect viewing: Tilt between -2~10 degrees, relieving fatigue of your cervical vertebra and lumbar vertebra fatigue
6. 3°horizontal adjustment:you can fix the minor error while installation within ±3
7. Automatic Safety locking System : With magnetic knot,safety lock can be adsorbed on the mount neatly and securely.
8. Easy Installation Separate wall plate, easy installing by sliding; magnetic bubble level included
9. Cable management system: unsightly cables can be concealed effectively making the whole TV set clean and tidy.
10. fits for most curved tv mount such like: Samsung UN65KS9800 UN65KS9500 UN65KS8500 UN55KS8500 UN49KS8500 UN65KU7500 UN55KU7500 UN49KU7500 UN65JS9500 UN65JS9000 UN55JS9000 UN48JS9000 UN65KS850D UN65JU750D UN65KU6500 UN55KU6500 UN55K6250 UN65JU6700 UN55JU6700 UN48JU6700 UN55JU670D UN65JU670D

Product Features

  • Don’t take us lightly, our heavy-gauge TV mount holds 32″ – 70″ TVs weighing up to 99lbs. Don’t worry, we’ll do the heavy lifting: Each and every Loctek mount is tested to hold more than 4 times the weight it’s rated to – Safety Tested – UL Certified
  • Mounting has never been so easy: 30 minutes to install on 16″ studs, with all hardware included and pre-divided.
  • Pulling out to 18.8″ and back in to 3.3″ from the wall gives your TV smooth moves.
  • Window glare bugging you? 10-degree tilt capability makes adjustments easy.
  • VESA:600*400,600*300,600*200,600*100,500*400,500*300,500*200,500*100,400*400,400*300,400*200,400*100,300*400,300*300,300*100

Visit the website for more information…

2 thoughts on “Loctek R2 For Both Flat Panel And Curved Panel UHD HD TV Wall Mount Bracket Articulating Arm Swivel & Tilt for most of 32-70 Inches LED, LCD, Plasma, OLED TVs

  1. Great mount, well built and sturdy Great mount, well built and sturdy. Check your stud spacing on the wall you intend to mount it on. My wall happened to be a none load bearing wall with 24″ spacing between studs and the location where I wanted to mount the TV was 3″ of center to a stud. So due to the limited width of the mounting feet I would have only had two lag bolts supporting the TV if I wanted to use that exact location. Ended up using two 2″x50″x.025″ aluminum bar stock and mounted them to the wall…

  2. Outstanding piece of gear! Purchased this mount after reading lots of reviews. Used to mount a flat LED Samsung 40″ TV to our living room wall. It it very heavy duty and easy to install. Looks good too. This also allows me to upgrade to a bigger or curved TV later and still use the same mount.Helpful hints:1. Many reviews talked about the TV falling forward and not staying perfectly vertical. There are tension bolts and hex nuts on the mount. The two bigger 1/2″ nuts are for the tilt…

Leave a Reply

Your email address will not be published. Required fields are marked *